Special Finishes

Architectural and Decorative Coating Specialists

Colourtrend Acrylic PaintsColourtrend Acrylic Paints

Stippletex

Print this page Save this page as a PDF Product enquiry

Descripton:

A pure acrylic, high build textured coating for exterior and interior.  Stippletex provides a flexible, waterproof, abrasive resistant membrane that is extremely durable, especially when glazed.

Uses:

Commercial and residential buildings, interior and exterior where a decorative, hard wearing, durable finish is required.

Properties:

Extremely flexible, waterproof, abrasion resistant coating that can be applied over most sealed substrates, including concrete, weather boards, fibre cement sheeting, etc.

Finish:

Low sheen, low profile texture depending on method of application.  Available in white or can be tinted to light and medium tones - BSS 5252 colours.

Application:

Roller or spray application is recommended, Blacktex Stipple surfaces.

Coverage:

2 - 2 ½ m² per litre, per coat.

Dry time @ 15'C

Touch Dry ½ - 1 hour
Recoat 3 - 4 hours


Temperature must be above 10ºC during application and drying.

Packaging:

10 litre pails

Specification:

2 coats to be applied over primed or sealed substrate.  For Gloss finish, or for extra durability and abrasion resistance, glaze with Ultraglaze.  Sealer for masonry fibre, cement sheeting, etc. - Refer Strongwall Acrylic Sealer data sheet.

Warranty / Liability

Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.