Acrylic glaze is a single pack waterbased glaze specially
formulated from 100% pure acrylic polymers - containing
sophisticated U.V. protective additives for long term
durability. Incorporation of biocides and mould inhibitors
giving extensive mould, algae protection. Displays excellent
blanch, water, alkali, oil and grease resistant
characteristics.
Designed as a clear finish over Marblestone silicates,
Marblestone coating, Shieldtex High Builds, roof Coatings; as a
dust sealer over concrete floors on masonary, bricks, Swirltex,
etc. Interior or exterior for additional U.V. protection,
together with hardwearing low dirt pick up properties.
Extremely flexible, early blanch and water resistance. Low
dirt retention with exceptional oil, grease resistance, coupled
with U.V. and mould, algae, protective characteristics.
Roller, brush, spray, and airless spray.
2 coats - approximately 6-10m² per litre, depending on substrate
type.
Clean water -when dry AP Thinners or Meths.
Supplied in - 4, 10, and 20 litre pails, or 200 litre steel
drums Non-flammable waterbased product.
Warranty / Liability
Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.