Flexiscribe is an acrylic hi build texture that will provide a
scratched dragcoat effect with straight lines, circles or sponged
finish - in fine, medium or coarse textures.
Flexiscribe can be worked into a variety of endless patterns
providing an elegant subtle appearance with special effects -
producing decor with a difference.
Flexiscribe is used exterior or interior, over Harditex,
Villaboard, concrete, plastered walls, block buildings, Styrofoam
building blocks, over Strongwall and Gib-board on commercial
buildings, shops, shopping malls, factories, schools, offices,
restaurants, condominiums, bungalow complexes, and any place that
requires a protective coating along with decorative special
effects.
- Exceptional long term performance
- Remains permanently flexible - will move up to 3mm to prevent
cracking
- Contains high loadings of unique algicide, biocides for long
term algae, mould, mildew protection, especially in tropical
countries
- Designers decor with a difference
- Colour throughout system
Flexiscribe in white, stone white or all B.S. colours
available.
Overcoat with Mediterranean Limewash providing a patinaed look
and weathered appearance with Mexican Terracotta or any desired
colour.
Multifleck can also be applied for an alternative unique
effect.
Low sheen, or can be overglazed for gloss finish or graffiti
protection.
Apply using steel trowel, hawk, hopper gun, pump systems,
pressure pot. Final desired finish, use plastic or wooden
float.
| Fine scribe or sponge finish: |
1-2 litres per m² @ 1-2mm thickness |
| Medium finish |
2-3 litres per m² @ 2-3mm thickness |
| Coarse finish |
3-4 litres per m² @ 3-4mm thickness |
Do not thin, clean up using water when wet, Use Special Finishes
Brushwash or Meths if dry.
Not applicable, waterbased.
4, 10, 20 litre plastic pails.
Wear protective overalls. Eye and skin contact,
flush with copious amounts of water.
Observe new Occupational Safety & Health Instructions
(O.S.H.)
Warranty / Liability
Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.