Special Finishes

Architectural and Decorative Coating Specialists

Colourtrend Acrylic PaintsColourtrend Acrylic Paints

Flexicure RT100 Sponge Finish

Print this page Save this page as a PDF Product enquiry

Coating for Special Effects

Description:

Flexicure RT100 Sponge Finish is an acrylic hi build texture that will provide a natural sponged finish effect with a medium texture, that remains permanently flexible, formulated in all colours as desired.

Fleicure RT100 Sponge Finish can be worked into a variety of endless patterns providing an elegant subtle appearance with special effects - producing decor with a difference.

Use on exterior buildings and can also be used on interior walls over gib-board or elephant plaster board for a specialised sponge finish inside projects.

Typical Uses:

Flexicure RT100 Sponge Finish is used eterior or interior, over Fibrecement Sheets, Hardite, Villaboard, concrete, plastered walls, block buildings, Styrofoam building blocks, over Strongwall, Gib-board, Elephant Plaster board on commercial buildings, shops, shopping malls, factories, schools, offices, restaurants, condominiums, bungalow complees, and any palce that requires a protective coating along with decorative sponge finishes or special effects.

Features:

  • Exceptional long term performance
  • Remains permanentlyh flexible - will move up to 3mm to prevent cracking
  • Contains high loading of unique algaecide, biocides for long term algae, mould, mildew protection -especially in tropical countries
  • Designer decor with a difference, exteriors and interiors
  • Colour throughout system

Colours:

Flexicure RT100 Sponge Finish in white, stone white or all B.S. colours available or to your own colour sample.

Special Effects:

It is recommended that Flexicure RT100 Sponge Finish be overcoated with Colourglo Acrylic Low Sheen or Shieldte High Build or for buildings subject to considerable movement use Colourtrend Elastomeric Membrane (CTEM) in all colours.  Even overcoat Mexican Terracotta or any desired colour.  Multifleck can also be applied for an alternative unique effect.

Finish:

Low sheen, or can be overglaed for gloss finish or fraffiti protection.

Application:

Apply using steel trowel, hawk, hopper gun, pump systems, pressure pot.  Final desired finish, use plastic or wooden float.

Coverage:

Fleicure RT100 Sponge Finish - 2 litres per m2 @ 2mm thickness

Medium finish - 2-3 litres per m2 @ 2-3 mm thickness

Clean up/Thinning:

Do not thin, clean up suing water when wet.  Use Special Finishes Brushwash or Meths if dry.

Dangerous Goods:

Not applicable, waterbased.

Packaging:

4, 10, 20 litre plastic pails

Health & Safety:

Wear protective overalls.

Eye and skin contact: Flush with copious amounts of water.

Observe new Occupational Safety & Health Instructions (O.S.H.)

Warranty / Liability

Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.