Special Finishes

Architectural and Decorative Coating Specialists

Colourtrend Acrylic PaintsColourtrend Acrylic Paints

Multibond Adhesive

Print this page Save this page as a PDF Product enquiry

Adhesive Polymer for Cement Systems

Description:

Multibond Adhesive is a fine particle size Acrylic Adhesive polymer, designed to promote permanent adhesion and flexibility when blended with cement - on all types of substrates.

Features:

Multibond Adhesive will improve water resistance of concrete, allows for the application of thin plastered cement, for flushing compounds over existing new or old concrete, concrete beams, columns, ceilings, and blockwork.  Will prevent oxide pigment bleeding from coloured cements, pattern printed cements, used as a primer for floor toppings, and concreting over existing new or old cement floors.  Prevents rusting of reinforcing steel, and will stop solid plaster becoming drummy and losing adhesion, prevents dusting of concrete floors.

Suggested Uses:

Specifically formulated to be used with Portland cements for flushing over concrete with thin coats to achieve a smooth finish over concrete poured columns, beams, ceilings and block buildings.  used with concrete, Shieldpatch, Strongwall or coloured cements on hotels, hospitals, schools, factories, freezing works, commercial and industrial complexes.

Mixing Instructions:

Use 50% Multibond Adhesive based on quantity of cement in mix.  for optimum results, adhesion and weatherproofing, use 4 litres by volume to each bag of Shieldpatch.  the minimum quantity to be used is 25% based on Portland cement quantity in the batch of concrete.

Typical Properties:

Appearance White Milky Liquid
Solids Content 40%
pH when packed 9.5
Specific Gravity 1.05
Minimum film Formation Temperature 5'C


Warranty / Liability

Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.