Special Finishes

Architectural and Decorative Coating Specialists

Colourtrend Acrylic PaintsColourtrend Acrylic Paints

Asbestos Fibre Cement Roofs

Print this page Save this page as a PDF Product enquiry

Preparation:

Cleaning

Apply one liberal coat of Chemocide Tile Cleaner @ 5m2 per litre coverage (diluted equal parts 1 to 1 with clean water) to kill mould spores and sterilise roof.

Heavy mould areas may require an additional saturation of Chemocide to ensure mould is completely neutralised.

Allow a minimum of 2 weeks before waterblasting takes place.  If more time is available, the Chemocide treatment will assist the cleaning process when applied up to 30 days prior to water-blasting, or longer.

Warning: Due to the Asbestos content of this product special care must be taken to eliminate spray contamination during the cleaning process.  It is important to check with local Councils for their requirements as water-blasting may not be allowed.

Paint System

Prime all Galvanised Flashings and vents with Tetracure P10 Primer.

Apply one coat of Fibreseal Concentrate Sealer to entire surface to be coated (6m2 per litre).

Apply two coats of Colourtrend Elastomeric Membrane at the rate of 4m2 per litre, per coat.

Application:

Airless spray applied.

Warranty / Liability

Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.