Colourcoat Solvent

COLOURCOAT

UV Protective Top Colour Coat

Colourcoat is a two pack exterior/interior UV protective colour coating designed for general industrial, automotive and marine use to provide a total system when used with 2 pack primer.

Coloured films have high quantities of ultra violet protective additives and are tough, resilient and non-yellowing with exceptional exterior durability.

USES:
Colourcoat systems provide a very hard durable and resilient finish with high resistance to a wide range of chemicals / acid rain in tropical countries and are particularly suited to coat over a wide range of substrates especially steel work and nonferrous metals primed with the appropriate primers.

NOT RECOMMENDED:
Application to damp surfaces. Long term immersion, alkalies or solvents..

HANDLING PRECAUTIONS:
Solvent and resin fumes can be harmful and can contaminate foodstuffs. Provide and wear suitable respirator and protective clothing when spraying.
WARNING : Contains Isocyanates. When sprayed this product may be harmful by inhalation. Do not breathe vapour or spray. Avoid contact with skin or eyes. Wear protective clothing, gloves, eye and face protector including suitable breathing protection such as an air supplied respirator OSH approved when spraying.

FLASH POINT:
24oC - contents flammable
Gives off vapour. Keep well away from heat, sparks and flame

N.Z. DANGEROUS GOODS: Class 3B UN1263

INSTRUCTIONS FOR USE:
Thoroughly mix 4 parts A with 1 part B by volume, apply directly as supplied using mohair roller, allow 8
hours between coats. Dilute 25 - 40 % for spraying. Only use Colourcoat solvent or Ultraglaze solvent.

PACKAGING: Colourcoat Part A – 1, 4 Litres }

                     Colourcoat Part B – 500ml, 1 Litre } all in steel DG approved containers

POT LIFE: 25oC 50% relative humidity – in excess of 2 hours when thinned

DRY TIME:
25oC 50 % relative humidity
Surface dry - 1 hour
Re-coat - 8 - 24 hours

COVERAGE RATE:
1 or 2 coats in colour as required @ 10-15m2 / litre coverage
General areas, walls, machinery etc. - 12-15m2 per litre per coat, 2 coats recommended
Trafficable areas, Chemical splash areas - 10-12m2 per litre per coat, 2 coats recommended Automotive and marine – 12-15m2 per litre per coat, 2 coats recommended

FILM BUILD:
WET: Walls - 65-85 microns (0.003thou) per coat
         Floors - 85-100 microns (0.004 thou) per coat
         Auto and marine - 65-85 microns (0.003 thou) per coat
DRY: Walls - 25-40 microns per coat
        Floors - 30-50 microns per coat
        Auto and Marine - 25-40 microns per coat
THINNING:
Thin 10% for spray application only using Colourcoat solvent or Ultraglaze solvent.
CLEAN UP:
Colourcoat Thinners, UC500 Reducer