Special Finishes

Architectural and Decorative Coating Specialists

Colourtrend Acrylic PaintsColourtrend Acrylic Paints


Print this page Save this page as a PDF Product enquiry


Polysilk is a 100% Pure Acrylic extremely high quality waterbased paint system that displays exceptional water resistance and exterior/interior durability.  Polysilk offers excellent resistance to water, ultra violet light degradation, blocking and dirt pick-up, and is particularly suited for use on roofs, factory walls, houses, etc.


  • Polysilk is a low sheen finish
  • Has excellent wash and wear characteristics and the durability of a high gloss finish
  • Provides exceptional ultra-violet light, flexibility, and long term protection to all substrates.

Uses Exterior:

Roof Coatings, Strongwall Cladding System, stucco, weatherboards, Harditex, block buildings, concrete substrates, galvanised iron roofs, tile roofs, and on any timber surface.

Uses Interior:

Lounges, Walls, Ceilings,Bathrooms, Laundries, Gib-board, Hospitals, Schools, Factories, Offices, Shopping Complexes, or any place requiring a low sheen with wash and wear scrubbability.

Instructions for Use:

Application Brush, roller, spray, airless
Coverage 6-10 m² per litre, depending on substrate, texture - on Teroleon Stucco Concrete Finish allow 2 m² per litre per coat
Touch Dry 1 hour, depending on ambient temperature and relative humidity
Recoat 3 - 6 hours
Number of Coats 2 coats, depending on substrate - on new concrete, Strongwall Sealer should be used
Clean Up Water
Packaging 4 litre, 10 litre & 20 litre plastic pails

Available on request

Non-Flammable, Non-Toxic, Non-Hazardous


Warranty / Liability

Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.