Special Finishes

Architectural and Decorative Coating Specialists

Colourtrend Acrylic PaintsColourtrend Acrylic Paints

Lacquercoat Automotive finish

Print this page Save this page as a PDF Product enquiry


Lacquercoat is manufactured with extremely high quality, hard flexible Acrylic Polymers.  Designed for excellent exterior durability for all types of automotive uses - with early blanch resistance and exceptional performance against ultra-violet light for long term protection.


  • Can be applied over all types of automotive finishes, Lacquer Primers, etc.
  • Exceptional U.V. durability
  • Fast drying with gloss finish direct from gun - can also be compounded and polished
  • Superior blanch resistance
  • Excellent chemical resistance


All types of automotive finishes; cars, bikes, trucks, buses - containers, rubbish jumbo bins, boats steel cabinets, furniture, customwood, etc.


By spray gun, airless spray, electrostatic spray, air mix.

Thinning & clean up:

Thin between 30% to 60%.  Use A.P. Thinners or Ultragloss.

In hot conditions, 10% Supergloss Retarder should be added.


Application to metal and aluminium or galvanised iron - always apply Tetracure P10 Primer.  Polyester Automotive Fillers, use Tetracure P10 Primer or Lacquer Primer diluted to very low viscosity from 100% to 200% with A.P. Thinners for first coats.  Clean, sanded metals - use Lacquer Primer or Tetracure P10 Primer.


Always use correct Etch Sealer and Tetracure P10 or Metaltech Primer on metals, galvanised iron, aluminium, etc.

Heath & Safety:

Wear protective overalls, goggles and gloves.  Maintain adequate ventilation at all times.  When spraying use approved respirator with organic vapour cartridge.

Eye Contact Flush with copious amounts of water, or dilute boric acid solution and seek immediate medical aid
Skin Contact Wash thoroughly with soap and warm water.
Warning Keep away from sparks and open flame.  Smoking should not be permitted in working areas.  Extremely flammable liquid - Keep out of reach of children - avoid breathing vapours - Contains aromatic hydrocarbon solvents
Dangerous Goods Flammable Liquid, 3A

Warranty / Liability

Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.