Lacquercoat is manufactured from high quality Acrylic
Polymer. Designed to seal and coat customwood, wood, metal,
and all types of furniture. It is a high gloss coating with
excellent opacity, durability and blanch resistance, and is
suitable for interior or exterior use.
- Direct application to customwood - acts as its own sealer
- Excellent gloss finish direct from spray gun
- Superior blanch resistance
- Suitable for interior or exterior use, with exceptional
durability.
Customwood, video/stereo cabinets, speaker units, steel or metal
cabinets. All types of furniture, hardboard, particle board,
over pre-primed aluminium, galvanised steel, plastics, etc.
Can be applied over Lacquer Primers, Acid Cat Sealers, etc.
By spray, airless spray, air mix, brush or roller, and
electrostatic spray.
Thin with UC500 Reducer. thin and clean up with A.P.
Thinners or Supergloss Retarder - electrostatic solvents
available.
- Apply 1 coat diluted 30-50% with Special Finishes' A.P.
Thinners. Allow 20 minutes to dry - sand slightly to smooth
finish - dust free.
- Apply 3-4 further coats maintaining a good wet edge.
Allow to dry. Sand between coats if required.
Always use correct Etch Sealer and Tetracure P10 Metaltech
Primer on metals, galvanised iron, aluminium, etc
Wear protective overalls, goggles and gloves. Maintain
adequate ventilation at all times. When spraying use approved
respirator with organic vapour cartridge.
| Eye Contact: |
Flush with copious amounts of water, or dilute boric acid
solution and seek immediate medical aid |
| Skin Contact: |
Wash thoroughly with soap and warm water. |
| Warning: |
Keep away from sparks and open flame. Smoking should not
be permitted in working areas. Extremely flammable liquid -
keep out of reach of children - Avoid breathing vapours - contains
aromatic hydrocarbon solvents |
| Dangerous Goods: |
Flammable Liquid, 3A |
Observe new Occupational Safety & Health Instructions
(O.S.H.)
Warranty / Liability
Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.