Special Finishes

Architectural and Decorative Coating Specialists

Colourtrend Acrylic PaintsColourtrend Acrylic Paints

UV Protective Colour Coat

Print this page Save this page as a PDF Product enquiry


Colourcoat is a two pack exterior / interior UV protective colour coating designed for over coating Ultraflex flooring, used on roofs, decking, walls, factories and step coatings. Coloured films have high quantities of ultra violet protective additives and are tough, resilient and non-yellowing with exceptional exterior durability.


Colourcoat systems provide a very hard durable and resilient finish with high resistance to a wide range of chemicals / acid rain in tropical countries and are particularly suited to coat over galvanised iron roofs, fibrecement or tile roofs, commercial buildings, factories, schools, apartments, over decks on ships, boats, super yachts and heavy industrial use over Aquepoxy floors, and over membrane systems especially Ultraflex, interior or exterior, coating for hi-build acrylic systems, used over Ultraflex on roofs / decks / floors, on steel / timber / plywood, etc. On ships / boats / trucks / buses / horse floats, etc.

Not Recommended:

Application to damp surfaces. Immerson,alkalies or solvents.

Handling Precautions:

Solvent and resin fumes can be harmful and can contaminate foodstuffs. Provide and wear suitable respirator and protective clothing when spraying.


Contains Isocyanates. When sprayed this product may be harmful by inhalation. Do not breathe vapour or spray. Avoid contact with skin or eyes. Wear protective clothing, gloves, eye and face protector including suitable breathing protection such as an air supplied respirator OSH approved when spraying.

Flash Point:

24°C - contents flammable

Gives off vapour. Keep well away from heat, sparks and flame

N.Z. Dangerous Goods:

Class 3B

Instructions for Use:

Thoroughly mix 4 parts A with 1 part B by volume, apply directly as supplied using mohair roller, allow 8 hours between coats. Dilute 25 - 40 % for spraying. Only use Colourcoat solvent or Ultraglaze solvent.


Colourcoat Part A - 4 litres or 20 litres

Colourcoat Part B - 1 litre or 5 litres

All in steel DG approved containers

Pot Life:

25°c 50% relative humidity - 2 hours

Dry Time:

25°C 50% relative humidity

Suface Dry 1 hour
Hard Dry 2 hours
Re-coat 8 - 24 hours

Coverage Rate:

Over Ultraflex 1 or 2 Coats in colour as required @ 6m² / litre coverage
Walls 6-8m² per litre per coat

1 coat minimum

2 Coats Recommended

Floors 4-6m² per litre per coat

3 coats minimum

2 coats recommended


For correct material quantities, divide total area by two (3 coats = 2m² per litre coverage).

Film Build:

WET Walls 125 microns (0.005") per coat
Floors 250 microns (0.010") per coat
Dry Walls 50 microns (0.002") per coat
Floors 100 microns (0.004") per coat



Thin 10% for spray application only using Ultraglaze Thinners.

Clean up:

A.P. Thinners, Ultraglaze Thinners

Refer to Special Finishes NZ Ltd for unfamiliar substrates.

Warranty / Liability

Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.