Special Finishes

Architectural and Decorative Coating Specialists

Colourtrend Acrylic PaintsColourtrend Acrylic Paints

Armepoxy Flooring Screed

Print this page Save this page as a PDF Product enquiry


Armepoxy Flooring Screed is a 2 pack self-leveling hi build epoxy coating that is recommended wherever an attractive appearance, easy cleaning, and effective resistance to chemical attack and abrasion resistance are desired.


  • Easy application - self-leveling
  • High chemical resistance
  • High abrasion resistance
  • Excellent adhesion
  • Easy cleaning
  • Decorative finish


All types of industrial, commercial and processing concrete floors - including laboratories, workshops, garages, hospitals and freezing works.


Matt or Semi Gloss


Serrated spatula, trowel and squeegee  (Note: Serrated spatula length of teeth determines thickness of coating.)

Surface Preparation:

Acid Etch, waterblast clean and allow to dry.  Apply 1 coat Optiseal epoxy Sealer.  Damp surfaces, apply 1 sealer coat of Aquepoxy.


4 Litre Pack

Part 'A' - 3 litres in a 4 litre tin

Part 'B' - 1 litre in a 1 litre tin

20 Litre Pack

Part 'A' - 15 litres in a 20-litre tin

Part 'B' 5 litres in a 5 litre tin

N.Z. Dangerous Goods Class:



Flammable.  Keep out of reach of children.  Avoid contact with skin and eyes.  remove from skin immediately.  use suitable respirator.  Wear protective clothing, including eye protection.  Provide adequate ventilation.


Observe new Occupational Safety & Health (O.S.H.) Instructions.

Mix Ratio:

Volume A & B- Important to mix accurately.

Stir each part thoroughly, then add A & B together and power stir until mixture is homogenous.  Leave to stand for 15 minutes.  Stir and use.


Not normally required.

Pot Life:

At 25°C, 50% relative humidity, 1-2 hours.

Cure Times @ 15'C:

Touch Dry 8 Hours
Foot Traffic 24 Hours
Unrestricted 7-10 Days


3-5 mm


3-5 litres per 1 m² per coat

Clean Up:

Special Finishes' All Purpose Thinners


Warranty / Liability

Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.