- Acid Etch /Waterblast. Allow to Dry
- Apply 1 coat of epoxy Sealer at 10 m2 per litre
- After sealing, repair any cracks, etc., using Epoxyflex
Filler
- apply 2 coats Armepoxy Swimming Pool epoxy at 6 m2 per litre
per coat
Warranty / Liability
Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.