Floorscreed 100, a self-leveling cement system designed for use
over pre-cast concrete floors or existing uneven floors.
Specifically formulated to achieve a fast setting level surface
with ease of application, providing an economical surface in
standard Cement Gray or coloured systems.
- Finishing rough screeded floors
- Leveling up uneven floors
- Resurfacing old floors
- Over Terrazzo, Quarry or Ceramic tiles
- Special Sealer provided for exterior use
- Fast installation - Pourable or pumpable
- Rapid strenght gain for fast installation
- Resistance to cracking
- Cured for foot traffice after 2-4 hours
- Normal traffice after 24 hours
- Can be feathered out from 5 mm to .500 microns for smooth edge
finish
| Compressive Strength |
1 Day |
15 MPA |
| (AS 2073) |
28 Days |
26 MPA |
| Flexural Strength |
7 Days |
4 MPA |
| (ASTM C348) |
28 Days |
6 MPA |
| Flow time @ 23'C |
10 Minutes |
|
| Setting Times @ 23'C |
Initial 2 hours |
- 3 Hours |
| Bond Strength |
1.0 MPA |
|
| Application Temperature |
15 - 28 'C |
|
Note - the data shown is based on controlled laboratory
tests. resonalbe variation from the results can be expected
in practice.
Warranty / Liability
Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.