Solvent Sealer is a low viscosity solvent base clear acrylic
sealer used for sealing fibrecement board, concrete, cement
plasters etc.
Solvent Sealer is ideal as a sealer coat on fibrecement board
including the jointing prior to application of the jointing
compound and cement plasters such as Strongwall.
It is suitable as sealer for concrete, cement plaster and
fibrecement board prior to application of paint based textures such
as Texturecoat and Shieldtex High Build.
It is also suitable as a dust sealer for concrete floors.
Apply one coat of Solvent Sealer at a coverage rate of 4-6m2 /
litre to all surfaces prior to application of jointing compound,
plasters or texture.
For dust sealing of concrete apply a further coat at 4-6m2 /
litre.
Apply by brush, roller or spray. No thinning is
necessary.
Allow to dry minimum of two hours before overcoating.
Product contains flammable liquid. keep away from sparks
and open flames. do not smoke during use. Keep out of
reach of children. Avoid breathin vapours. contains
aromatic hydrocarbon solvents. Wear gloves, goggles and
protective clothing during use. Excessive skin contact may
cause dermatities.
Class 3B Flammable liquid.
Warranty / Liability
Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.