Ultrathan M.C. is a moisture cured interior clear coating
designed to overcoat all types of wood finishes, including particle
board, cork tiles, pine floors, etc. Clear films are tough,
resilient and have exceptional abrasion resistance.
Ultrathane M.C. system provides a very hard durable finish with
high resistance to a wide range of chemicals, and are particularly
suited to coat over interior particle board flooring, cork tiles,
pine floors, interior seamless flake flooring, table tops, etc. -
used on shools, gymnasiums, shops, shopping malls, houses,
commercial and industrial buildings.
- all particle floors, cork tiles, pine floors - should be sanded
to smooth clear finish.
- Vacuum total areas, removing all dust, etc. before
application.
First coat - dilute 30% Ultrathane M.C. Solvent - add to roller
tray. Apply 1 coat using Mohair roller sleeve. Allow
1-2 hours to dry.
Apply 2-3 even coats as supplied, sanding between coats only if
desired. always vacuum safter sanding. Allow 3-4 hours
between coats.
(Keep original container sealed. Only add sufficient
material to tray that will be used. Do Not allow moisture or
return material to container as it could cure remaining
contents.)
6m2 per litre per coat - minimum 3 coats recommended.
Allow a minimum of 8 hours before light traffic - 36 hours for
heavy traffic.
Gloss only.
12 Months unopened. After opening, limited - dependent on
moisture content in atmosphere.
Ultrathane solvent or Brushwash.
Solvent and resin fumes can be harmful and can contaminate
foodstuffs. Provide and wear suitable respirator and
protective clothing when applying in confined areas.
Provide adequate ventilation at all times. contains
Isocyanates.
24'C contents flammable
3B, UN No. 1263
10'C
25'C 50% relative hunidity - 2 hours.
Warranty / Liability
Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.