Acrylic Hi Build Texture finish in fine, medium or coarse.
Suitable as a long life durable coating on most substrates to
produce a flexible waterproof finish. Available in a wide
range of BSS 5252 colours.
Commercial and residential application over concrete - walls,
beams and columns, concrete blocks and fibre cement sheeting with
joints taped or flushed using Special Finishes Limited sytems.
A very flexible Hi Build Acrylic, containing granulated marble
giving excellent abrasion resistance, outstanding exterior
durability and water resistance. Minimal dirt retention
depending on the roughness of texture and glaze finish which can be
specified in varying degress of gloss.
By a Special Finishes Limited Licensed Applicator by Hopper Gun
- although Texturecoat can be rolled or trowelled.
Various substrates require sealing prior to application of the
Texturecoat - most surfaces such as concrete plaster and cement
coatings and fibre cement sheeting should be sealed with Special
Finishes Limited Pigmented Acrylic Sealer. Concrete blocks
are sealed with Shieldtex Block Sealer - a Hi Build fibre filled
coating. Timber should be primed prior to over-coating.
Refer to Special Finishes data sheet regarding sealers to obtain
the correct recommendation.
Teturecoat recommended coverage is 1-1½ m² per litre
Film Build |
1-3 mm depending on texture |
Applied by |
Spray or Roller |
Thinning and Clean up |
Water |
Drying time |
1-2 hours |
Can be over-coated in Acrylic Glaze or we recommend Ultraglaze
for extended durability. Both are available in varying
degress of gloss. Refer to the relevant Special Finishes
Limited data sheets.
A free technical and advisory service is available from Special
Finishes Limited, or your Licensed Applicator who can quote to
apply the Texturecoat.
Warranty / Liability
Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.