Special Finishes

Architectural and Decorative Coating Specialists

Colourtrend Acrylic PaintsColourtrend Acrylic Paints

Triseal W.S. Pigmented Sealer

Print this page Save this page as a PDF Product enquiry


A high opacity, all purpose, alkali resistant, urethane based, interior and exterior undercoat and sealer.  Expecially formulated to be compatible with Customwood, Triboard and all Special Finishes Products.  Available in white, but can be tinted.


Recommended for sealing and undercoating new Customwood (WDF) products, Triboard, plaster, Gib-board, building boards, as an interior wood primer for timber, and as an exterior undercoat over alkyd wood primer for weatherboards, timber, etc.  When overcoating with an enamel system.  Refer special finishes' when painting over pinex and hardboard.  (Not suitable for use with lacquer top coats.)


Proides an excellent base for all finishes.  it is easy to apply and sands to a smooth high quality finish.

Dry Time @ 20'C:


Touch Dry 5-6 Hours
Recoat 16-24 Hours

Temperature should not fall below 10'C while applying or drying.


Brush, roller or spray conventional (or airless).  Ready for use when rolling or brushing.  reuce with White spirits or Mineral Turpentine to spray, approximately 5% - 20%.


8-10m2 per litre per coat, depending on roughness and porosity of substrate.


Flammable flashpoint 40'C.  Provide adequate ventilation.

Clean Up:

White Spirits or Mineral Turpentine.


4, 10 and 20 litre pails.

Warranty / Liability

Special Finishes (NZ) Ltd provides all the enclosed information in good faith but without warrantee and is to assist your application. However the use of this product being used is beyond their control. The manufacturers can accept no responsibility whatsoever for any damage or failure arising from its application or use. It is totally the responsibility of the user to insure that the product is suitable for its intended use.