Fibreseal Concentrate Sealer

DESCRIPTION : Fibreseal is a self-curing Polymer specifically developed to cure and contain all types of Asbestos particles. This chemical action enters all voids in Asbestos, bonding all fibres permanently together, preventing further cracking of fibre sheets.
Contains sophisticated fungicide and mould inhibitors for complete mould and algae protection.
Used alone, or can be overcoated with Colourtrend Elastomeric Membranes or Colourtrend Paint Systems.

USES : Extensively on old fibrolite sheeting, Super Six Asbestos Roofs, Textured Ceiling Sprays, Fibreboards and
dust sealer for concrete substrate.

TYPICAL PROPERTIES : Extremely hard, flexible compound with early blanch and water resistances coupled with U.V. and mould, algae, protective characteristics.

COVERAGE : Concrete Tiles: dilute equal parts with clean and apply at 5m2 / litre to give an effective
coverage rate of 10 m2 per litre. Asbestos Fibrecement roofs – apply undiluted at 6m2 / litre.

APPLICATION : Can be applied undiluted by conventional spray, airless spray, brush, roller. When
diluted can also be applied by knapsack sprayer.

DRY TIME : 15 – 30 minutes at 20° c and 50% RH. Overcoat after a minimum of 2 hours.

SURFACE PREPARATION : Use Chemocide Cleaner.

DANGEROUS GOODS : NON-FLAMMABLE PRODUCT