Shieldtex High Build

In stock
SKU
Shieldtex High Build
$85.00

A thick Acrylic coating that provides a flexible membrane for most substrates. Can be self-textured by splattering.
Waterproof, abrasion resistant, and extremely durable; especially if finished with the recommended glaze coating which qualifies the product for the Special Finishes 10 Year Guarantee.


USES:
Wide ranging commercial and domestic application, including concrete walls and columns, beams, and block walls, fibre cement sheeting and other areas where a strong Elastomeric Coating is to be specified.


PROPERTIES:
Extremely flexible, waterproof and abrasive resistant with a low dirt retention factor.
It is recommended that it be glazed for extended durability. Glaze coats available in varying degrees of gloss.


FINISH:
Available in Low Sheen or Gloss finish. Dries with a low profile texture, depending on method of application - roller or spray. Hi Build is often applied over gun textured Shieldpatch on concrete, block walls, or over the Special Finishes' Strongwall Insulated Wall Cladding System.


COLOURS:
White can be tinted to many of the BSS 5252 Range. On some surfaces only light to medium colours are recommended.
Refer to Special Finishes or your Applicator when specifying.


PREPARATION:
Most surfaces require a Sealer, and reference should be made to the data sheet covering Sealers prior to specifying Hi Build Acrylic. In many cases such as concrete blocks, Hi Build Acrylic can be applied as a 2 or 3 coat system directly, but better results particularly against water ingress will be made if Shieldtex Fibre-filled Concrete Block Sealer is used first.


PRODUCT DETAILS:
Hi Build Acrylic recommended coverage -
              2 - 2.5 m2 per litre
              Film Build: 200 microns on a smooth surface
              Applied By: Spray or roller
              Thinning & clean Up: Water
              Drying Time: 1-2 hours
TECHNICAL SERVICE:
A free technical and advisory service is available from Special Finishes Limited, or your Applicator who can quote to apply the Special Finishes' Hi Build System.

0
Rating:
0% of 100
Write Your Own Review
You're reviewing:Shieldtex High Build