TrippleCoat Primers & Sealer

DESCRIPTION: A premium grade 100% Pure Acrylic with adhesion premoters which acts as a Primer, sealer and Top coat all in one. suitable for both exterior and interior surfaces, in a Low Sheen Finish.

USES: TrippleCoat on modified cements, bricks, cement plaster, concrete blocks, fibre cement sheeting, Gib-board, insulation board, plaster and Timber.

APPLICATION: On all plaster, gypsum board and concrete, dilute first coat using 20% clean water - to ensure penetration adhesion. We recommend the application of 2 – 3 Coats, use as supplied or dilute 10% water. Apply by speed brush, brush, roller, conventional or airless spray. Ready for general use - reduce with water to spray (approximately 15% with water). Clean up with water before drying.

DRY TIME @ 15°C:
Touch Dry - 1-2 hours Recoat - 4-8 hours (or overnight)
(Temperature must be above 10oC during application and dry time.)

COVERAGE: 8-10 m2 per litre per coat, depending on surface porosity over other substrates

PACKAGING: 1 Lire, 4 Litres, 10 Litres pails

CLEAN UP: Water