Ultrathane MC

DESCRIPTION : Ultrathane M.C. is a moisture cured interior clear coating designed to overcoat all types of wood finishes, including particle board, cork tiles, pine floors, etc. Clear films are tough, resilient and have exceptional abrasion resistance.

USES : Ultrathane M.C. system provides a very hard durable finish with high resistance to a wide range of chemicals. Particularly suited to coat over interior particle board flooring, cork tiles, pine floors, interior seamless flake flooring, table tops etc. - used on schools, gymnasiums, shops, shopping malls, houses, commercial and industrial buildings.

PREPARATION :
1) All particle floors, cork tiles, pine floors - should be sanded to smooth clear finish.
2) Vacuum total areas, removing all dust, etc. before application.

SEALING :
First coat - dilute 30% Ultrathane M.C. Solvent - add to roller tray.
Apply 1 coat using Mohair Roller Sleeve. Allow 1-2 hours to dry.

Apply 2-3 even coats as supplied, sanding between coats only if desired. Always vacuum after sanding.
Allow 3-4 hours between coats.
(Keep original container sealed. Only add sufficient material to tray that will be used.
DO NOT allow moisture or return material to container as it could cure remaining contents.)

COVERAGE RATE : 6 m² per litre per coat - minimum 3 coats recommended.

DRY TIMES : Allow a minimum of 8 hours before light traffic - 36 hours for heavy traffic.

FINISH : Gloss only

SHELF LIFE : 12 months unopened. After opening, limited - dependent on moisture content in atmosphere.

CLEAN UP : Ultrathane Solvent or Brushwash

HANDLING PRECAUTIONS : Solvent and resin fumes can be harmful and can contaminate foodstuffs. Provide and wear suitable respirator and protective clothing when applying in confined areas.

WARNING Provide adequate ventilation at all times. Contains Isocyanates.

FLASHPOINT : 24ºC - contents flammable

N.Z. DANGEROUS GOODS CLASS : 3B, UN No. 1263

MINIMUM APPLICATION TEMPERATURE : 10ºC

POT LIFE : 25ºC 50% relative humidity - 2 hours