UNISEAL CONCRETE SEALER

In stock
SKU
UNISEAL CONCRETE SEALER
$15.00

DESCRIPTION:
Uniseal is an Acrylic Sealer Undercoat especially formulated for use by Qualified Tradesmen with excellent
durability, opacity, and self-leveling. Available in white, but can be tinted on request.

USES:
As a Sealer for Uniseal or other modified cements, bricks, cement plaster, concrete blocks, fibre cement
sheeting, and as an Undercoat on exterior primed timber. For interior use as a Sealer Undercoat on
Gib-board, insulation board, plaster, along with sealing Spraytex and all types of existing Textured Ceilings.

APPLICATION:
On concrete in hot tropical climates, dilute first coat using 50% clean water - to ensure
penetration adhesion.
Other areas we recommend the application of 1 coat followed by the finishing coats.
Apply by brush, roller, conventional or airless spray. Ready for general use - reduce with water to spray
(approximately 15% with water).

DRY TIME @ 15oC:
Touch Dry - 15 minutes - 1 hour Recoat - 3-4 hours
(Temperature must be above 10oC during application and dry time.)

COVERAGE:
2-4 m2 per litre over Uniseal, Stucco, etc.
6-10 m2 per litre per coat, depending on surface porosity over other substrates

PACKAGING: 500mls, 1 Litre, 2 Litres, 4 Litre and 10 Litre Pails

CLEAN UP: Water

0
Rating:
0% of 100
Write Your Own Review
You're reviewing:UNISEAL CONCRETE SEALER